Creating a Barrel Swing

My fiance Shellie has an incredible passion for her job as an early childhood teacher, her area of expertise is the outdoors and how children interact with outdoor spaces.

She had an idea of creating a big barrel swing, and sourced a big blue barrel as a starting point.

Once brought home to the forge we took it into the workshop dungeon to carve with the Jigsaw. First we took one of the ends off, this created a space where the children could crawl into. We then cut a window into one of the curved edges of the barrel. This window allows the children to hang their legs out of the barrel, to see out of the barrel, or even climb through into the barrel, and allowed the children to create the swinging motion by pushing against the ground..

Shellie cutting the front window out of the swing.

The next step was to drill four holes into what would be the top of the swing, rope will be tied through these holes so it can be hung securely at the Early Childhood Centre.
We also drilled a couple of holes in the bottom for the purpose of drainage.

Once we were happy with the shape of the swing we had to soften the edges. We scraped off as much of the rough plasctic shards as we could and then tried to sand the edges which clogged the paper, the next trick we tried was melting the edges so they were flat; we used a small blowtorch and guided the flame across the plastic edges this worked well.

Once at the Centre we used rope to suspend the swing. Using knots that would not slip or come undone we tied the barrel to hooks which were screwed into the platform above.

The swing in place at the centre.

The general reaction from the children at the centre was excitement at the new interactive piece of playground equipment,