CD Shelf - A music archive

I love music, my main collection is in  the form of the Compact Disc. CD's are a format that I have grown up with and that suits my needs. I love the feeling of purchasing a new CD and opening it, playing the music, and experiencing the artwork and sometimes lyrics inside that comes with my purchase.

My first ever CD purchase was from the video store in Picton, I was browsing their small collection and saw an album I would likely never see again: 'Primary' by 'Rubicon'. A band from Auckland that found a small amount of popularity in the early 00's due to a song called 'Bruce'. I had to have it, even just to say that I was one of the few people in the country/world to have it.

Some of my collection is from compiling full discographies of an artist as I have done with Shihad, The Datsuns, and Alice In Chains. My CD collection is mostly of Kiwi and Rock music, with a few exceptions, sometimes when browsing a CD store I will see something different that I buy purely out of curiosity, and that purchase sometimes becomes a favourite, like Chirs Jasper's 'Superbad' album.

Iron Cactus shaped CD rack

Flimsy CD rack

My organization of the physical CD's has always been done using CD racks, the CD rack has been my chosen piece of display furniture as it enables many CDs to be stored in one place and is easy to access. Sometimes however, CD's fall from the rack, and make a mess, and it turns out they aren't they most space efficient. The two CD racks above are no longer in use as they are not very practical.

It was time to reorganize.

I decided to build a simple shelving unit specifically for the purpose of storing my CD's. I had some pieces of timber perfect for building such a shelf so I got to it. I measured the two side pieces and the back piece so they were the correct height, I then measured six shelves to be the same length as the width of the back piece. I screwed the sides to the back piece and then measured out the correct spacing between each shelf before screwing them together.

My new shelving unit made of recycled timber.

Now I could display more of my CD's in a smaller area (150 approx). Also this purpose built shelf allowed space for the CD's which were not standard size. e.g. the box for Korn's 'horrific little mutations'* album and the Supergroove box set of EP's.

Five empty shelves

I am very happy with this CD shelf. It suits its purpose extremely well and fits the look of my bedroom which is full of other handmade wooden furniture.

When it comes time for me to leave the flat that I am in, this shelf will be easy to move without having to remove the CD's, another convenience that will save time and energy.

The finished and full CD shelf next to my other CD rack.

I might need to make another of these shelves soon enough.


*The Korn album I am referring too is better known as 'untitled', named this way so that the listener could name it as they see fit.

Korn 'Untitled' or 'Horrific Little Mutations' or anything you want to call it.

Creating a Barrel Swing

My fiance Shellie has an incredible passion for her job as an early childhood teacher, her area of expertise is the outdoors and how children interact with outdoor spaces.

She had an idea of creating a big barrel swing, and sourced a big blue barrel as a starting point.

Once brought home to the forge we took it into the workshop dungeon to carve with the Jigsaw. First we took one of the ends off, this created a space where the children could crawl into. We then cut a window into one of the curved edges of the barrel. This window allows the children to hang their legs out of the barrel, to see out of the barrel, or even climb through into the barrel, and allowed the children to create the swinging motion by pushing against the ground..

Shellie cutting the front window out of the swing.

The next step was to drill four holes into what would be the top of the swing, rope will be tied through these holes so it can be hung securely at the Early Childhood Centre.
We also drilled a couple of holes in the bottom for the purpose of drainage.

Once we were happy with the shape of the swing we had to soften the edges. We scraped off as much of the rough plasctic shards as we could and then tried to sand the edges which clogged the paper, the next trick we tried was melting the edges so they were flat; we used a small blowtorch and guided the flame across the plastic edges this worked well.

Once at the Centre we used rope to suspend the swing. Using knots that would not slip or come undone we tied the barrel to hooks which were screwed into the platform above.

The swing in place at the centre.

The general reaction from the children at the centre was excitement at the new interactive piece of playground equipment, 

Building a Wardrobe.

When we moved into our flat in Wadestown, Shellie and I claimed a large bedroom, the only problem was it didn't have any storage space. For the first while it was quite a mess. We moved a couple of shelving units into a spare bedroom down the hall and hung all of our clothing in a wardrobe down the hall that wasn't being used, this was less than ideal but worked nonetheless.

In the months following I came up with ideas on how to optimize the space in our bedroom and to contain our stuff. One of these ideas was to build a wardrobe that would live in our room and not down the hall.

Over the next few weeks I constructed a wardrobe that would fit our needs. It would be over 1 meter wide and tall enough to house two bars full of clothes.

I had the help of my friend Adam, and Shellie also helped out.

1900mm X 600mm.

One solid wall piece.

After completing construction of the guitar stand Adam and I set to work on creating the wardrobe walls. Using sanded down pallet wood we measured and cut the timber, laying it out so it was 1900mm tall and 600mm wide. We used five other pieces of timber to screw to the laid out pieces, thus forming one solid wall piece. This was harder than we initially assumed it would be as our pallet timber was imperfect, bowed slightly in places, and not all the same thickness, this meant an inventive and rough technique was needed to force the timber together in places before screwing it all together so that it aligned neatly.

Over the next few weeks I finished off the second wall; I cut in half a steel beam to create two smaller beams of even length; and I made both a top and bottom base which the two walls would sit in and be attached, this I achieved by nailing four 4X2 pieces together much the same way as I had for the guitar stand.
Before lining it all up I used my jigsaw to cut out gaps where the two beams could slot in; this was an error of judgement as I hadn't made an allowance for the top base which had an overhang that covered the gap. This cost me time in cutting a new piece of timber and a new gap.

Lining it all up

Top base overhanging the gap for the beam.

Before nailing the walls to the bases and constructing the wardrobe as a complete piece of furniture I needed to make it pretty and safe. A lot of the screws I had used were longer than the wood was thick so they stuck out dangerously. Being the safety buff as I am I needed to find a way to remove them. I called Adam over and he provided me with an angle grinder which he taught me how to use. The two of us took turns removing any sharps from the two walls, using the correct protective gear. Safety glasses for our eyes and earmuffs for our ears. The grinder is a dangerous tool and we had to clear the area from anything that could catch on fire from the sparks, a perk of having a friend who is a volunteer fire fighter in has spare time.

Adam taught me how to use the Angle Grinder

We removed sharps from the two walls.

We cleared the works bench of things that could catch on fire.

That evening I brought the pieces of wardrobe into the bedroom, I couldn't construct it elsewhere in the house as it wouldn't fit through the hallways very easily. Shellie helped to hold the walls steady while I nailed the pieces together. when the box was completed with the two bars inserted into their gaps I assessed the wardrobe, it had quite a bit of movement, so I cut and sanded down two braces to cross the back of the wardrobe, these stabilize the whole wardrobe, stopping excessive movement.

Shellie helped me by holding the walls still.

The two back braces stabilized the wardrobe.

The finished wardrobe fit the corner of our room snugly. The next night I took delight in filling it with our clothes. Now we no longer have to walk the length of the house to pick out the next days clothes. 

Our new wardrobe filled with clothes.

Creating a wardrobe from nothing but pallets was an exciting opportunity to learn some new D.I.Y. techniques, to learn how to use tools I haven't explored before, and to add another piece how furniture to our room that tells a meaningful story that purchasing an ugly plastic rack never could. By reworking old materials into something new I am adding my work and my daily life to the wardrobe. I am creating a new history for materials that already have a prior history, to me that is fascinating.

I don't know exactly where this timber came from originally but I can decide where it will end up after I am finished using it during my time flatting. Likely it will be used again as a wardrobe by someone else, taking with it the history of its creation and my use of it.

Guitar Stand

For years at my home and again at our flat I've had to slump  my guitars in the corner of the room; this gets them out of the way which is good, but there are a couple of downsides to this method is storage, the first being it doesn't look very attractive; The other downside is that when I want to use a guitar I have to lift the other guitars out of the way and try not to clatter them around too much, I fear doing this scratches them and knocks them about which isn't too good for the acoustic guitars which already have a few bumps and scratches.

On my to do list was to create a guitar stand that could house my guitars. I had a source of timber from the pellets I had deconstructed and I began to draw up some plans.

Two small pieces of 4×2 for the base. On top of this will sit two larger pieces of 4×2, these will have the body of the guitar resting in them. Two pieces of 2×2 will stand vertical at the back of the base. One piece of timber will be a back support joining the two 2×2. Lastly six pegs will stick out from the top of the guitar stand to separate the guitars.

Construction started Saturday with Shellie and I building the base. Next we needed to attach he 2×2 but the timber we had was painted an awful blue, ideally the guitar stand will be the colour of natural timber. We decided that I would revisit it the next day.



Sunday a good friend of mine Adam came over, us boys took over my man cave and we set to work. I began to sand the blue paint away but it was taking too long without a belt sander. Adam suggested we try to use his little plane. He brought out the tiniest hand held plane I had ever seen and we took turns stripping the paint off with it. I tidied up the 2×2 by giving it a quick sand. We then proceeded to assemble the guitar stand. When it was time to attach the pegs I struggled to see that they would be sufficient, they appeared as more of an eyesore than anything else.

The scrapings of paint and timber it took off the wood.

The tiniest plane I have ever seen,

Having Adam there brought about many new ideas. The best being to replace the pegs with a piece of timber along he top which could then have five notches cut out of it for the guitar necks to rest in. We ended up attaching a peg at each end and then the timber on top. I then measured and drew on the notches and cut them out with my jigsaw.

I also decided that I would like a place to hang a ukulele. I found some dowel that could hold a uke; I used my drill to create some holes for the dowel, an appropriate space apart for a ukulele to hang, I squirted some glue in the holes and then pushed the dowels inside.

The guitar stand was complete. The next step was to put it in its place in  the corner of the room and to decorate it with my guitars. It looked superb once in place. I am absolutely stoked with the way it turned out and I should have done it years ago. The guitar stand completely fills it's purpose, it looks beautiful with the natural wooden tones complementing  the other wooden furniture in the room, and it prevents a mess of guitars from forming in the corner of the room.



To use recycled pellet wood to create a beautiful piece of furniture is a great feeling. I have created something out of recycled free timber which many people discard as dirty and worthless. This is what I live for, finding and creating beauty from nothing.

Our New Flat and the Dungeon.

Shellie and I and three other friends got together and decided we need to get a place to ourselves. We began the flat hunt. After a few good flat viewings, being disappointed when we missed out; and a few terrible flat viewings and counting our lucky stars that we can afford not to have to put up with that level of filth; we found a place in Wadestown on Weld St.
We spent an exhausting Saturday moving in and then over some celebratory beers we fittingly came up with a name for our house “The Forge”.

The forge is the perfect residence for us at this stage of our lives. Each of us has a large enough bedroom. There is enough parking space for our cars and the scooter. There is a space out the front of the house ideal for BBQ’s and sun bathing. The location in Wadestown is close enough to everything, plenty of fast food eateries, a dairy, a bus stop, a taxi stand, and only a five minute drive to the city. There are plenty of green spaces nearby including the Ahumairangi hill, perfect for weekend runs, and Trellisick Park, which has plenty of walking tracks and picnic spots.

The property also includes a space beneath the lounge which had been neglected and deemed a spot for rubbish storage. When I first saw this area of the house I was excited, I could make excellent use of such a space.

Halfway through sorting the junk and adding my own belongings

I spent the night of Wednesday cleaning out the space which has the flat has dubbed “the dungeon”. There were all sorts of lost treasures and junk buried in there. Old benchtops, doors, a bed base, pieces of a couch, a mirror, timber, shelves, a sink, a playstation, a creepy music box, gardening tools, a watering can, storage bins, the list goes on.

A creepy music box

A big mirror

The first thing I did was using a scrap of GIB clear away the masses of spider webs throughout the space. I stacked all of the wood in a corner, out of the way. I didn’t bother to remove the rubbish and other junk, but I did stack it neatly out of my way.

Accumulated cobwebs

Next I gave the place a good sweep. There was years of dust piled up across the floor, hidden within every nook and cranny, and throughout all of the shelves. I just swept it under the floorboards, as underneath is the ground; dust is dirt so to the dirt with the dust.

As the tidy up continued

All along the front wall of the dungeon is a huge display of shelves, these provide the perfect space to put all of my D.I.Y. bits and bobs, and things I usually put in the garage.

Storage and Workbench

The dungeon provides a space for my belongings which I don't mind getting dusty, this includes things like Outdoors equipment, ropes, tents etc.

The mountain of rubbish which previous tenants left behind.

As it is a long room it is ideal for small target practice. I have a toy BB gun and the space is ideal for shooting cans with the gun.

One of the flat mates  has a dart board which he has allowed to be setup in the dungeon. I measured up the hooks and then put a couple of nails into the wall studs. I hung it on the wall and it provides an excellent environment to practice accuracy with darts.

A beautiful piece of artwork.

A couple of things that I haven't gotten around to are fixing the air ventilation system which has been poorly attached and even more poorly duct taped. So with a friends help I'll do a better job of taping it.

Fantastic Ventilation; Yeah Right!

There are also a few wires that hang down from above my head that lead to the lights and other electrical outlets, I want these well away from my head space so that I don't pull them down, removing the light source in there or electrocuting me.

It's my space and I'll put what I want in it

Ultimately the dungeon is a space for me to play with my tools. I am always looking for projects to do with which I can use my tools, I stapled some pieces of cardboard to the wall so I could write up my upcoming projects and have them in front of me as a reminder. I have a few projects planned, so watch this space updates.

Storage - Shelves/Containers

Have you ever seen those television shows about people who seem to hoard lots of things who have the inability to be able throw anything away?
I reckon a lot of people are like them only different. I will admit I hoard things, useful things, and maybe some useless things. Pens. String. Ribbon. Broken cellphones. The only difference between myself and these hoarders is I know how to store my stuff without it looking like I live in filth.

http://thecorp.org/blog/2014/04/a-hoarders-guide-to-spring-cleaning-2/

When I buy music I am a sucker for a physical compact disc. I love opening the case, admiring the artwork, and then displaying the CD for all to see. For this reason I use CD racks, eclectic shaped, yet, densely packed CD racks. They don't look like mess, they look like furniture. (More frequently CD cases are being made from paper rather than the classic smashable plastic case).

Centre: Cast iron, cactus shaped CD holder.

You've seen the shelves I made from old timber, Storage using shelves is a space-wise way to not only hold things, but also to have easy access to them. Without good shelves everything would be stacked up and the things at the bottom would be lost and forgotten about. Or scooped into a heap and thrown away.

Seen above is a picture of some more shelves that we use in our small house. It may look somewhat messy but you can see some organization amongst the chaos, from bottom to top we have shoes and tramping packs, my toolbox, craft materials, clothing, bags, linen, kitchen appliances, non perishable food and drink, outdoors gear, hats etc.
Every little section is sorted into an efficent storage space, for example, here is how I keep my shoes ordered in an old beer crate.

I have found whilst living with stuff it is easier to sort your stuff than to not. Using containers to store your belongings is a practical way to contain your stuff that means easy access to it whenever you need it. I use a range of containers to achieve organized cleanliness, many of which are recycled junk. We use lolly tins for hair ties, bobby pins, and earrings. We use plastic moisturizer tubs for scout woggles, old cards and ribbons.

A Wooden box to house lose cords and headphones,

A decent metal toolbox is a useful container in a number of ways, it can lock so the tools stay safe from people who know not how to use them, and keeps potentially dangerous tools away from accident prone people. It is waterproof, inside and out, and it can be carried anywhere I need using the side handles. But as a toolbox is intended I can throw my tools into it and close the lid.

A thing of near-retro beauty that I do not want to part with is my old apple I-mac Computer. But it takes up a lot of table space. Using scraps of wood from around the property my partner Shellie knocked together a shelf that holds the moniter up and allows the keyboard and mouse space to slide underneath.

By using old old and recycled materials you can become more efficient with the space you have available. Organize your stuff and your life will become less cluttered. By keeping and organizing objects instead of throwing them away you begin to accumulate resources that will one day when needed be given a second life instead of merely being thrown out, you don't have to buy the material when you need it brand new.