CD Shelf - A music archive

I love music, my main collection is in  the form of the Compact Disc. CD's are a format that I have grown up with and that suits my needs. I love the feeling of purchasing a new CD and opening it, playing the music, and experiencing the artwork and sometimes lyrics inside that comes with my purchase.

My first ever CD purchase was from the video store in Picton, I was browsing their small collection and saw an album I would likely never see again: 'Primary' by 'Rubicon'. A band from Auckland that found a small amount of popularity in the early 00's due to a song called 'Bruce'. I had to have it, even just to say that I was one of the few people in the country/world to have it.

Some of my collection is from compiling full discographies of an artist as I have done with Shihad, The Datsuns, and Alice In Chains. My CD collection is mostly of Kiwi and Rock music, with a few exceptions, sometimes when browsing a CD store I will see something different that I buy purely out of curiosity, and that purchase sometimes becomes a favourite, like Chirs Jasper's 'Superbad' album.

Iron Cactus shaped CD rack

Flimsy CD rack

My organization of the physical CD's has always been done using CD racks, the CD rack has been my chosen piece of display furniture as it enables many CDs to be stored in one place and is easy to access. Sometimes however, CD's fall from the rack, and make a mess, and it turns out they aren't they most space efficient. The two CD racks above are no longer in use as they are not very practical.

It was time to reorganize.

I decided to build a simple shelving unit specifically for the purpose of storing my CD's. I had some pieces of timber perfect for building such a shelf so I got to it. I measured the two side pieces and the back piece so they were the correct height, I then measured six shelves to be the same length as the width of the back piece. I screwed the sides to the back piece and then measured out the correct spacing between each shelf before screwing them together.

My new shelving unit made of recycled timber.

Now I could display more of my CD's in a smaller area (150 approx). Also this purpose built shelf allowed space for the CD's which were not standard size. e.g. the box for Korn's 'horrific little mutations'* album and the Supergroove box set of EP's.

Five empty shelves

I am very happy with this CD shelf. It suits its purpose extremely well and fits the look of my bedroom which is full of other handmade wooden furniture.

When it comes time for me to leave the flat that I am in, this shelf will be easy to move without having to remove the CD's, another convenience that will save time and energy.

The finished and full CD shelf next to my other CD rack.

I might need to make another of these shelves soon enough.


*The Korn album I am referring too is better known as 'untitled', named this way so that the listener could name it as they see fit.

Korn 'Untitled' or 'Horrific Little Mutations' or anything you want to call it.

We Made a Veggie Garden!

Labour day brings us a Monday of work off and an excuse to either blob and do nothing for an extra day or to jam pack our weekend full of all of the things that we wish we had time to do but generally don't.

My fiancee Shellie and I chose the latter.
We like being busy creating things or going on adventures throughout our city and country. We decided Saturday we would wake up early and get straight to work in making a vegetable garden.

The basis of the garden; old pallet timber

We salvaged the old pieces of pallet timber from around the property to construct a box that would provide the basis of our garden.

Take note ladies, you too can get stuck in.

I had a simple design for a box in my mind and between us we brought it to life, we each wielded a hammer and got to work creating the box.

Wood slats on the bottom

Seeing as we were to put our new garden straight onto the lawn I decided that putting a bottom on it would contain the soil and plants in the box and also keep weeds from outside of the box from getting in.

Salvaging wood from old pallet scraps.

 We didn't have quite enough pieces of timber the right length to cover the entire bottom so I had to deconstruct some other pieces of pallets I had around to get all of the pieces needed.

The bottom covered

Giving the box the bottom not only acts as a container for the soil and plants, but also gives the rest of the box strength, by pulling it all together.

Our finished box

 The morning's job was over, we had completed the box construction, after lunch we would get to planting some veggies.

The garden box in its final resting position, unobtrusive and situated for morning sunshine.

We have been flatting in Wadestown at the forge, for the better part of this year, and have consistently been adding to a compost bin that was here on the property when we moved in. Over the course of six months we have been adding our food scraps and grass clippings to the compost bin and given a mix every now and then. The result of six months of being fed and breaking down, is beautiful soft soil that can now be used for our garden, hopefully to yield a good bunch of vegetables (at least enough for a salad).

The black compost bin stays out of the way

Inside is a mix of soft soil and the plant matter that will break down into it.

It took a few trips of carting buckets back and forth from the compost bin to our garden in order to fill it up. It also became hard to dig the soil out from the bin, fortunately these compost bins do not have a bottom so they can be pulled up and over from around the soil, this made things a lot easier.

The box filled with soil and divided into 9 equal sections.

By dividing the garden into sections we made it easier to keep track of the plants we will plant, one square for each species.

Constructing a frame for bean vines to climb

We had purchased some bean plants which grow in the form of a vine, in order for these to grow properly we had to construct a frame which could then have string hanging from it.

Stringing the frame so the plants can climb up

We planted a bunch of different plants including beans, tomatoes, carrots, capsicum, cucumber, lettuce, and also marigolds. The marigolds are said to repel moths and other insects; hopefully this means that when our vegetables grow they will not be eaten by bugs but be in tact for when we want to eat them.

Watering our plants for the first time.

We watered all of our plants for the first time, something we will continue to do, especially on hot summer days. Watering is best done at dawn and dusk, when it is the right temperature to allow the plants to absorb the water without the sun evaporating it.

Gardener Jayden: American Gothic impression

And of course, the best way to celebrate a job well done is by posing in a few silly photos. Behind these two silly poses I was sincerely stoked with what we had accomplished in a day. It is about time I starting taking part in gardening, something I think is so central to sustainable living.

Gardener Jayden: Rocking out with a rake.

Gardening is a fantastic hobby to have. It requires hard work, care, and patience. Just like hunting and farming it allows people to appreciate where their food comes from. Through consistent care of your garden you will reap the benefits of nutritious food to sustain your own body; you will also know exactly what has gone into the soil to create your food, it is your decision whether or not you use pesticides or fertilizers to enhance your plants growth (ideally not), I believe a garden needs good soil, plenty of sunlight and a little bit of water to encourage the best growth.

That's it.

Put simple things in to get the best things out. I hope. I'll tell you how it works out at the end of summer.

Spontaneous Table Construction

The weekend just been has been a weekend of laziness and recovery.
My fiancee Shellie and I headed up the island on a road trip to Napier with our good friend Liv, we shared the weekend with friends and did activities that required little effort and encouraged the recovery of the body and mind. Sleeping in past 8.00AM; eating good food in supurb locations; Relaxing our joints and muscles at Ocean Spa; and sharing a couple of cheeky beers.

A Picnic Lunch at White Pine Bush with friends.

Sunday lunch was roast chicken, and while that was cooking I noticed a pile of timber, old bed slats from a broken bed. I asked our host Terry what we could do with it, make a chair? a table? a stool?

Broken bed and the timber slats that we recycled.

Terry had been meaning to do something with the wood for some time, my prompt was the kick up the bum that he needed to do it. A plumber by trade, he had all of the tools required for most home DIY projects. He decided on making a coffee table to sit on the deck, perfect for coffee and other beverages to rest on while we enjoy the summer sun in Napier. 

The table top with one edge holding it together.

We cut six of the old bed slats down to size to make the table top and then cut four more pieces to hold them together as edging. Terry's tools were Makita brand, they took some getting used to, as they have subtle differences to my Ryobi brand tools. The Skill saw had a different safety catch and it took some time for me to line each cut up as I had to figure out where to line the saw with the cut. This goes to show that every handyman has their preferred tools and each tool has its own subtle differences.

The self drilling screws used pulled the table together snug and strong.

The four edge pieces pulled the table top together, the final step was to create legs at the desired height for the table. Terry decided on using an excessive eight pieces of wood to create an L shape in each corner that would hold the table together rigidly. I thought four pieces would be sufficient but Terry was determined.

Terry with the near finished tabletop.

Whilst attaching the leg pieces Terry drilled the pieces together while I held the table tightly to ensure all pieces fit together correctly

The finished table

This small project took us around 90 minutes to complete, we enjoyed having a project to do, it cleared up the mess of the broken bed and transformed it into something beautiful and practical. We enjoyed the Sunday sunshine and when we were finished the chicken was cooked and it was lunch time.

Liv and Shellie enjoy each others company and the presence of the new table.

Construction projects don't have to take a long time, and I am finding more and more as I continue to practice my skills and improve it takes less time to build things.

Construction is a great hobby to get into; it uses your body in a physical way, allowing you to develop your gross and fine motor skills and your hand/eye co-ordination.

Through physical construction you make things, an end product, ideally something useful that can make someone's life a little bit better.

Construction encourages cultures of sustainability and recycling, making the most of all of your resources to ensure minimal waste is left behind.

Construction also strengthens relationships, Terry and I have bonded as mates through building something together, and now other people can stregthen their relationships with each other by enjoying each others presence whilst using the new drinks table.

Don't throw out! Use, Store, or Donate.

When it comes to spring cleaning and getting rid of all of the junk that you no longer use take a moment to consider where you might be able to send that stuff before concluding that it is rubbish doomed to a landfill. Also in your everyday dealings with waste consider these alternatives that are more environmentally friendly.

Getting started with the spring cleaning.

Appliances:
Old appliances when no longer useful or obsolete tend to take up space in a house. I still have an old Apple I-mac I am holding on to for no good reason. Some appliances still have value and it is easy to sell them on websites such as http://www.trademe.co.nz/ or in shops such as Cash Converters. If someone else can make use of it and you can profit from it then why not?

If that doesn't work you can try giving it away for free on websites such as https://nz.freecycle.org/. Here people give objects they don't want and take objects that other people no longer need. This website encourages re-purposing of everything from televisions and keyboards to glass jars and microphone stands.

Apple Imac. Taking up space and not being used.

Household items:
Anything intact and not electronic can generally be gifted to a second hand store, clothing, furniture, household goods, toys and books.

You can find your local Salvation Army Family Store here.
You can find your local SPCA Op Shop here.
You can find your local Wellington Vinnies Opshop here.
You can find your local Wellington Mary Potter Hospice Shop here

One of Wellington's many Op-shops.
http://www.vinnies-wellington.org.nz/wp-content/uploads/2015/01/Khandallah-Shop-Outside-2015-small.jpg

Clothing:
As well as the Op-shops listed above, there are some places that will take only clothing. Recycled clothing experts such as Rebound Clothing and SaveMart will take all clean clothing, even if it is ripped and useless.

Read here how SaveMart recycles through every step of their business:

Where does our stock come from?
It comes from various sources including:
1.Clothing Bin Contracts,
2.Recylcing Projects,
3.Woollen Mills,
4.Clothing Manufacturers,
5.Carpet Manufacturers,
6.Imports,
7.Surplus Stock,
8.Seconds and Opportunity Stores.

Hundreds of dedicated employees sort the incoming stock in to those items deemed suitable for sale in our stores, only the very best quality makes it onto the shop floor. It is value priced to sell in the same week. Unsold stock is removed after 4 weeks.

All wearable clothing etc that is unsuitable for sale in SaveMart stores is sent to Papua New Guinea where there is great need for clothing especially in the highland villages.

Inevitably there will be garments and material that are not able to be used again as originally intended, these can still be recycled as follows;

Cottons are made into Cleaning Rags, Knitted woollens and acrylic go to India to be made into blankets for relief organisations, Carpet yarn is used in the insulation industry.

Our aim is to recycle everything possible.

The inside of a SaveMart store, full of recycled clothing for sale.
http://savemart.co.nz/images/SaveMart_New_Brighton_065.jpg

Clothing Bins can be found in most suburbs throughout Wellington.
http://everydaysustainability.info/wp-content/uploads/2015/09/clothing-bin.jpg

As a person who always tries to make the most out of what I have got I tend to accumulate things, I'd like to differentiate between my thriftiness and being a hoarder because I try to use the things I accumulate. I have little containers filled with bits and bobs that I use from time to time. Here are a few examples of the stuff that I have that I hold onto for later use instead of throwing away.

Paper. Empty excercise books, blank paper, coloured paper, I have a pile of all sorts of paper that I can use whenever I need it. I use it to draw pictures, design my next project, scribble on, write lyrics or poems on, anything that I need blank paper for I have it sorted.

Shelf full of assorted leftover paper, to use when I have need. 

Scraps of paper. I tend to accumulate scraps of life in the form of paper, whether this be ticket stubs, pictures, words, cards, post cards, photographs, or any number of other beautiful things; I tend to keep them. I have previously organized these onto cork boards, but more recently I have compiled them into a scrapbook. My scrapbook is a way for me to remember many scraps of time in a creative way, I glue all of the different pieces into the book, and then draw and write words around it; I empty my brain of all of the memories associated with that physical piece of my history.

A few open pages of my scrapbook.

Some of the images and physical memories within my scrapbook.

I have old notebooks intended for drawing in. I challenge myself to fill them up, here I get the most crazy images that come from my mind, they are for my eyes only unless I choose to share them, and I get to use the pen and paper in a way that nobody judges. I challenge you to find an old notebook around and to fill it up with ink in anyway that you can.

A Sneak peek from my weird doodling book.

Other Junk: I keep a lot of other junk hidden away for when I need it. I use old containers to store things in. Have a look at this older blog post about storage conatiners for some examples.

As you can tell I try hard to reuse as much stuff as I can, however I am realistic and know when something is at the end of its life and should be recycled or thrown away. The key part is really trying to make things last.

When something reaches the end of its life be sure to recycle it if possible, some plastics can be added to your weekly recycling collection, as can some metals; other metals will need to be recycled by taking them to a scrap dealer, if the metal is worth anything you will also receive payment for it.

As the sun begins to stay around a bit longer and you approach spring cleaning, be sure to minimize waste, re-use and recycle.

Outdoor Furniture

As winter approached our Rover crew were able to sell off all of our firewood supplies, this freed up the pallets that were keeping the wood off the ground and dry. Back at the forge we sit through winter shivering and dreaming of the warm sun and how summer is going to be incredible with parties, BBQ's, outdoor fires and good company. We also discussed having some nice outdoor furniture to use and make use of our outdoor courtyard.

I took to the pallets in Makara, seperating the individual panels so they could fit in the car, and then driving them back to the Forge. I spent an evening removing the nails from the timber. Outdoor furniture is going to be exposed to the elements, so it does not need to be sanded down perfectly.

Piles of timber, de-nailed and ready to use.

One afternoon I jumped on the scooter and headed around to Mitre 10 around the corner, I returned with some nails, and set to work designing a simple chair. I drew some doodles and set out to work.
The chair was designed to be very square, I nailed 2x4 legs to 2x2 braces, and lastly nailed slats to the chair frame give the user some thing to sit on and then to lean against. It looked terrible. It was chunky and ridiculous.

The next day, I disassembled the chair and amended it. Using my skill saw I ripped the 2x4 pieces into two 2x2 pieces, I then trimmed them to make the chair shorter and reassembled. The chair, although a little wobbly, looked good, proportionate.

A couple of easy simple chairs.

A few days later I decided to make another chair, this time opting straight for the 2x2 legs. The result was a chair that looked the same but was somewhat stronger.

Table top Pallet, with a bit of work to do.

My recycled timber was left sitting in the courtyard for me to look at and ponder how I could use it. I had a large piece of a pallet that wasn't completely disassembled, the flatmates and I thought it would make a good table, so in my mind I tried to design it as a beautiful centerpiece. I decided to line the edges with 2x2 which I measured and cut to fit and then nailed to the main piece. I then used 4x2 to create four legs which I measured and cut to about knee height. When these were firmly attached the table was strong, with very little wobble to it.

The flat mates seemed to enjoy the new furniture.

That is a good start to the flats free, recycled, outdoor furniture. It looks good, it works well, and come summer it will be the envy of the neighborhood.

 The Sunday night after I'd made the table was a cold night but I wanted to light a fire, I lit the brazier, poured myself a drink, and Shellie my fiancee joined me for dinner outside. We were warm, and we enjoyed our furniture. We sat on the chairs and we could sit our bowls on the table. We then roasted a few marshmellows for dessert. Yum. Come summer, this will be a weekly occurrence; we'll be able to fire up the BBQ and enjoy food, drink, and good company in the sun.

Furniture, fire, music and food. A good night under the stars.

De-Construction of Pellets

With Valley Rovers as a fundraiser we decided to split wood and sell it on. While the wood dried it sat on a bunch of pellets which I got for free by asking nicely at the Dominion Post. As we have started to sell our wood and the pellets have freed up I have been able to take the pellets and make use of them.

I brought them back to our flat and tried a bunch of ways to deconstruct them. The videos below showed a couple of ingenious ways to take pellets apart without destroying the timber. I tried a couple of these methods but they were a bit  hit and miss.
I eventually told a mate of mine who in turn lent me his Stanley Wonder Bar Crowbar. This paired with a hammer did the trick. (Ear muffs were a must for deconstruction).

Stanley Wonderbar - as seen on Amazon.

I deconstructed pellets so as to make new stuff. I have a variety of projects in the line that require a large amount cheap timber, pellets are ideal for this, in my case they are free (apart from transport costs) it just require some time to deconstruct them and make them pretty.

Heres some videos I watched.

This video is a striaght up deconstruction video done with a hammer.
https://www.youtube.com/watch?v=ZtPmUZ-k3aI

This video shows an inventive method using the weight of bricks to seperate the timber.
https://www.youtube.com/watch?v=O7oWaRPpdKU

This video offers a range of methods that didn't apply to me, and is very safety conscious. But still a good watch.
https://www.youtube.com/watch?v=thAsa9jE2QQ

Heres the tools I used.
Hammer - any old hammer will do
Stanley Wonder Bar Crowbar - as seen above
Brush - mine is a wooden handled brush that came paired with a steel shovel, perfect for cleaning the dust and wood shavings off the timber and the floor.

A pile old pellets - yet to be turned into beautiful fresh timber.

Once the timber was separated out I used my claw hammer to remove any nails left in the timber. Sometimes the old rusty nails would snap off in the timber so for safety and the integrity of the timber I had to punch them deeper into the timber using another nail as a nail punch.

http://www.justagirlblog.com/how-to-install-a-pallet-wall-part-1/
The timber needs to have nails removed carefully to ensure its integrity.

The next step is to sand the timber. This strips the surface layer from the wood, revitalizing it and making it seem new again. I borrowed two electric sanders for this job. The first is the belt sander that rips off the old and used top layer of timber. I try not to rip too much off so the timber to give the timber the desired rustic look so people can see that the wood has already lived and served a purpose.

The timber is clamped down while I strip it using the belt sander.

http://www.skibuilders.com/phpBB2/viewtopic.php?t=810
Some timber given a rough sand.

Now that the timber is fresh, revitalized, ready to use I have to come up with a few projects with which I can use the timber. The first thing I wish to make is a wardrobe, as our current room in the flat doesn't have one. Other projects I wish to do with recycled timber include a guitar rack, and a book shelf.

4X2 planks salvaged from pallets and sanded down

A plank salvaged from a pallet. Nails removed and sanded down.

Now to make something, check out next weeks upcoming post to see what project I do first.

Our New Flat and the Dungeon.

Shellie and I and three other friends got together and decided we need to get a place to ourselves. We began the flat hunt. After a few good flat viewings, being disappointed when we missed out; and a few terrible flat viewings and counting our lucky stars that we can afford not to have to put up with that level of filth; we found a place in Wadestown on Weld St.
We spent an exhausting Saturday moving in and then over some celebratory beers we fittingly came up with a name for our house “The Forge”.

The forge is the perfect residence for us at this stage of our lives. Each of us has a large enough bedroom. There is enough parking space for our cars and the scooter. There is a space out the front of the house ideal for BBQ’s and sun bathing. The location in Wadestown is close enough to everything, plenty of fast food eateries, a dairy, a bus stop, a taxi stand, and only a five minute drive to the city. There are plenty of green spaces nearby including the Ahumairangi hill, perfect for weekend runs, and Trellisick Park, which has plenty of walking tracks and picnic spots.

The property also includes a space beneath the lounge which had been neglected and deemed a spot for rubbish storage. When I first saw this area of the house I was excited, I could make excellent use of such a space.

Halfway through sorting the junk and adding my own belongings

I spent the night of Wednesday cleaning out the space which has the flat has dubbed “the dungeon”. There were all sorts of lost treasures and junk buried in there. Old benchtops, doors, a bed base, pieces of a couch, a mirror, timber, shelves, a sink, a playstation, a creepy music box, gardening tools, a watering can, storage bins, the list goes on.

A creepy music box

A big mirror

The first thing I did was using a scrap of GIB clear away the masses of spider webs throughout the space. I stacked all of the wood in a corner, out of the way. I didn’t bother to remove the rubbish and other junk, but I did stack it neatly out of my way.

Accumulated cobwebs

Next I gave the place a good sweep. There was years of dust piled up across the floor, hidden within every nook and cranny, and throughout all of the shelves. I just swept it under the floorboards, as underneath is the ground; dust is dirt so to the dirt with the dust.

As the tidy up continued

All along the front wall of the dungeon is a huge display of shelves, these provide the perfect space to put all of my D.I.Y. bits and bobs, and things I usually put in the garage.

Storage and Workbench

The dungeon provides a space for my belongings which I don't mind getting dusty, this includes things like Outdoors equipment, ropes, tents etc.

The mountain of rubbish which previous tenants left behind.

As it is a long room it is ideal for small target practice. I have a toy BB gun and the space is ideal for shooting cans with the gun.

One of the flat mates  has a dart board which he has allowed to be setup in the dungeon. I measured up the hooks and then put a couple of nails into the wall studs. I hung it on the wall and it provides an excellent environment to practice accuracy with darts.

A beautiful piece of artwork.

A couple of things that I haven't gotten around to are fixing the air ventilation system which has been poorly attached and even more poorly duct taped. So with a friends help I'll do a better job of taping it.

Fantastic Ventilation; Yeah Right!

There are also a few wires that hang down from above my head that lead to the lights and other electrical outlets, I want these well away from my head space so that I don't pull them down, removing the light source in there or electrocuting me.

It's my space and I'll put what I want in it

Ultimately the dungeon is a space for me to play with my tools. I am always looking for projects to do with which I can use my tools, I stapled some pieces of cardboard to the wall so I could write up my upcoming projects and have them in front of me as a reminder. I have a few projects planned, so watch this space updates.